Reduce Cost & Increase Profits!

Stop beer loss when changing kegs.

Foam is beer – stop throwing it away when a keg empties. JC BeerTech’s foam detector knows when the keg is empty, and shuts down the flow of beer in the line. With our Foam Detector the beer line remains full when the keg empties. There is no need to re-fill the beer line: this reduces cost and maximizes glasses per keg.

Operation is Simple: Replace the keg, reset the JC BeerTech Foam Detector, and beer is flowing again.

Savings Chart

Foaming at the end of a keg and when starting a new keg cost bar operators profit from beer wastage at keg change over. Since the JC BeerTech’s Foam detector keeps the supply lines full during keg change over, this waste and subsequent loss of profit is eliminated. Average potential savings per keg change are illustrated below.

Using a 3/8 inch Supply Line

10 ft 6 oz

30 ft 18 oz

100 ft 50 oz (2.5 pints)

150 ft 75 oz (Almost 4 pints!)